Here are general instructions to use a single dose dusty inhaler.
To start, remove the inhaler cover. Then hold the base of the inhaler firmly and turn the nozzle to open. Press the buttons on each side of the base to test the small peaks inside the capsule chamber. These peaks pierce the medication capsule.
Remove the capsule from your sheet container and place it in the capsule chamber at the base of the inhaler. Do not place the capsule in the nozzle. Turn the nozzle back to a closed position.
With the vertical and vertical inhaler, press the spike buttons once. You should listen to a click; That is the capsule that is being drilled.
Release the buttons and prepare to inhale. Do not shake the inhaler.
Bring the inhaler to your lips in horizontal position. The blue spike buttons must be on the left and the right of the inhaler, not at the top and bottom.
Put your lips on the nozzle and breathe deeply and quickly. As you onhale, you will experience a sweet taste and listen to the capsule turning in the camera.
After inhaling, contain breathing for up to 10 seconds.
Open the inhaler to verify the excess dust. If some remain, close the camera and inhale again.
After use, remove the empty capsule and remove it. Then close the inhaler and replace the spokesman’s cover.
Your inhaler can come with slightly different instructions. Ask your doctor for a demonstration.
By
